Connecting the printer to the network can be a trouble if you don't know how to do it. If you have in new Brother h 2170 w printer and you're looking forward to connecting it to Wi-Fi, this post can help you. With Brother tn730 wifi setup, you can simply print the documents from multiple computers in a wireless environment. Connectivity eliminates the requirement of cable and also simplifies the connectivity process. In this post, we are going to say the simple step-by-step guide that can help you to connect your Brother's printer to the Wi-Fi.
Brother tn730 wifi setup: Guidelines to follow
- Turn off your printer with a power button.
- Press the "Go" button present on your printing device and keep holding let unless you turn the printer back on using the power button. Hold the button until you see the lights on the top of your Brother printer start blinking and then release it.
- Connect Brother printer to router using the ethernet cable. Now, wait for at least one minute and let your printer obtain the router network settings.
- Click on the "Go" button to get the printout of printer settings. On the last page of print settings, you can find the node type listing. If the status is "inactive", connect the cable to some other port on your router and try again.
- After this, find the printer IP address on the printing document.
- Open any preferred web browser on your computer and type this address for Brother tn730 wifi setup and hit the enter button.
- Go to the network configuration, and log in using the username and password.
- Click on the Ok button.
- Click on the "Configure wireless" option.
- From here to change the "Communication mode" to "Infrastructure".
- After that, click on the "Browse" button.
- Choose your Wi-Fi network from the list and hit the Ok button.
- Mention your authentication method and provide the password. Click on the Submit button and you are done.
- When the popup window appears on your screen, tap on Yes.
- Disconnect the network cable from your printer and wait for at least 60 seconds to let the printer refresh its wireless settings.
These are some simple steps for the Brother tn730 wifi setup on your computer. Once you have completed the setup process, you will be ready to print the documents anytime from anywhere using your printing device. Just make sure your printer and device you are using to print the document are connected to the same Wi-Fi network. Hopefully, the steps will let you easily complete the setup process for your Brother's printing device. But if you are still unable to set up the Brother printer on your own and need help, you can contact the Brother printer experts anytime for immediate assistance.
No comments:
Post a Comment