Why is my Brother printer not connecting to my computer?

Brother printer are known as the amazing printers with which you can print, scan, copy or fax the documents. But to use the full functionality of the brother printer, you firstly need to complete the process of Brother Printer connecting to WiFi. Once you complete the wireless setup, you can print the documents from anywhere. But most of the users complain that they are facing the issue in connecting their Brother printer to the computer due to which they are unable to print the documents. If you are the one who is facing the same issue then scroll down and keep reading the blog till the end to resolve the issue. Let’s get started without any further delay. 

Why Brother Printer is Not Connecting to My computer?

There are various reasons due to which you are unable to connect the Brother printer to my computer. Some of the reasons are listed below. Most of the issues are minor but some are major that causes the issues. Here’s are the reasons:

• Printer is not connected properly
• Change in the printer settings
• Loose wire connections 
• Establish the wrong connections
• Download the outdated drivers
• Printer is not installed properly 
• Change in the control panel settings 

Troubleshoot Brother printer is Not Connecting to My Computer

If you are struggling with the my brother printer is not connecting to my computer then keep reading the below troubleshooting tips to resolve the issue:

Step 1: Firstly, you need to make sure that the LED power light is lit when the printer is turned on.

Step 2: Make sure that the power LED light on your brother printer is stable and not flickering.

Step 3: Check the connection that you have established between your computer and the brother printer.

Step 4: You need to ensure that your computer is connected with your printer device properly.

Step 5: Make sure that the printer status has not been stopped.

Step 6: Check that the brother printer driver installed on your device is updated with the latest available version. 

If the Brother printer offline issue and not connecting to the computer persists then reset your printer. Follow the below steps to reset your brother printer and make it workable again:

Step 1: Initially, turn off your brother printer.

Step 2: After that, close the lids as well as covers of your printer.

Step 3: Plug in your printer;s power cable to the power socket and turn on your printer.

Step 4: Next, press the Go button located on the control panel of your printer until your printer is turned on properly.

Step 5: Release the Go button once the power LED light on your device becomes stable.

Step 6: In the next step, press the Go button again six times.

Step 7: Finally, reset of your brother printer to the factory default settings has been done successfully. 

Hopefully, the above-mentioned instructions will help you in the Brother Printer connecting to WiFi process without any hassle. In case, you are facing any issue in connecting your printer to the computer then you can contact our professional expert team for better guidance at our helpline number.