How to Setup Canon MG3122 by Using WPS Key Method

Canon MG3122 all-in-printer is used to print high quality documents and photos. The Canon MG3122 printer is very easy to use. Users share a great experience with the Canon MG3122 printer. Before starting the printing tasks, you need to complete the Canon MG3122 Wireless Setup of the printer. Setting up this printer is very easy. You just need to follow the below-mentioned steps to complete the setup. Once you are done with the setup, you can print and scan the documents and pictures wirelessly. Let’s explore the steps to set up the Canon MG3122 printer.

Basic steps for the setup of Canon MG3122 via WPS key method
Following are the basic and easy steps for the setup of Canon MG3122 printer:
Requirements for the setup:
Before starting the setup, you need to follow some instructions to utilize the WPS key method:

• First of all, you need to make sure that the WPS push button is available on the printer and router. For more details, you need to check the device’s user guide.
• Next, you need to check if your network is compatible with WPA1/WPA2 protocol or not.

After checking the above-mentioned requirements, you need to follow the following steps:
Step 1: Make sure that your printer is in an active state.
To check the active state of the printer, you need to follow the below-given steps:

• First of all, turn on the printer and press and hold the maintenance button on the printer for 5 minutes.
• Now the LED light will flash on the printer.

Step 2: Press the WPS button on the router

• If the WLAN connection setup is not fulfilled within 2 minutes after pressing the WPS button on the printer then you can face connectivity issues.
• You have to press the WPS button on the router within 2 minutes.
• Now, you have to check if the access point is turned on or not. If the access point is already turned on then turn it off and turn it on again.

Step 3: Network settings for configuring the printer

• You can print a single document to test the printer.
• First of all, you need to make sure that your printer is turned on.
• Now, you need to feed the A4-sized paper in the paper tray.
• Next, you need to click on the maintenance button again until the LED light flashes.
• Then, you need to press and hold the color key.

This is the complete blog about the Canon MG3122 Wireless Setup. Hopefully, by following the blog you can easily perform the setup of the Canon MG3122 printer. Though the setup process is very easy, still if you are facing any issues then please feel free to get in touch with our highly-experienced technical experts.